Global Properties Menu; Exiting The Intel Bios Configuration Utility; Troubleshooting; Section 4.6, "Exiting The Intel Bios Configuration Utility - LSI ITI7004G2- User Manual

4.5.5 Global Properties Menu

4.6 Exiting the Intel BIOS Configuration Utility

4.7 Troubleshooting

4-6
The Global Properties menu allows you to pause if an alert message has
been displayed, to view display boot information, and to set display and
video modes.
The Exit menu for the Intel BIOS Configuration Utility is used for all five
of the menus listed above. However, the available functionality is different
for the Main menu and the four subordinate menus.
To exit from the Adapter Properties, Device Properties, Boot Adapter List,
or Global Properties menus, use these exit options:
Cancel exit
Save changes then
exit this menu
Discard changes
then exit this menu
To exit from the Main menu, use these exit options:
Cancel exit
Exit the Configuration
Utility
Important: If you reboot the system without properly exiting from this
utility, some changes may not take effect.
The LSI Logic Intel BIOS Configuration Utility is a powerful tool. If, while
using it, you somehow disable all of your controllers, pressing Ctrl-A or
Ctrl-E after memory initialization during reboot allows you to re-enable
and reconfigure.
BIOS Features
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
This option returns you to the previous menu.
This option implements any changes you made on the
previous menu and returns you to the Main menu.
This option restores the default settings and returns
you to the Main menu.
This returns you to the Main menu.
This option exits the configuration and automatically
reboots your system.