The Fc Interface; The Fc Link Activity/Link Fault Led; Ieee Unique Address; Physical Characteristics - LSI ITI7004G2- User Manual

2.4.2 The FC Interface

2.4.3 The FC Link Activity/Link Fault LED

2.5 IEEE Unique Address

2.6 Physical Characteristics

The FC interface varies, depending on which specific LSI Logic 2 Gbit/s
host adapter you have selected. See Section
The LSI Logic 2 Gbit/s optical host adapter boards provide dual-purpose
LEDs (one per port), visible through the bracket, which indicate activity
on the FC link. Table 2.4
Fault LED for the given link status for each of the LSI Logic optical host
adapters.
Table 2.4

Appearance of LED to Represent Link Status

Adapter Link
LSI40919O Off
LSI40919LO Off
LSI44929O Off
LSI44929LO Off
ITI7004G2-LC Green
Each LSI Logic 2 Gbit/s host adapter channel is provided with a unique
World Wide Name, specified by IEEE. The last six hexadecimal
characters of this address appear on a label on the board. This address
is stored in the serial EEPROM on the board.
The LSI Logic 2 Gbit/s Fibre Channel host adapters include one to four
external Fibre Channel connectors, and are available with copper or
optical interconnect options. No configuration of the adapter is
necessary.
IEEE Unique Address
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
shows the appearance of the Link Activity/Link
Activity
Green Blinking
Green Blinking
Green Blinking
Green Blinking
Green Blinking
2.6 for more information.
Fault
Yellow
Yellow
Yellow
Yellow
Yellow
2-7