Motherboard Features - Supermicro X10DRT-H User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel E5-2600(V3) Series Processors (Socket
®
R3 LGA 2011); each processor supports two full-width
Intel QuickPath Interconnect (QPI) links (with Data
Transfer Rate of up to 9.6 GT/s per QPI)
Note: Both CPUs need to be installed for full
access to the PCI-E slots and on-board control-
lers. See the attached block diagram on page
1-10 to determine which PCI-E slots or devices
may be impacted.
•
Integrated memory controller supports: Up to 512 GB
of DDR4 (288-pin) Registered (RDIMM) / Load Re-
duced (LRDIMM) modules 1333/1600/1866*/2133**
MHz in 8 slots (** Maximum for 1 DIMM per channel)
Note: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM Sizes up to 64GB
64GB @ 1.20V
•
Intel® PCH C612
•
One (1) PCI Express 3.0 x8 (in x4) slot supported
by CPU1 (SXB1)
•
One (1) PCI Express 3.0 x16 slot supported by CPU1
(Slot 1)
•
One (1) PCI Express 3.0 x8 (in x4) slot by CPU2
(SXB2)
•
ASpeed 2400 BMC Controller with integrated VGA/2D
Graphics Controller 1920x1200@60Hz 32bpp
•
One Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet
Dual-Channel controller for GLAN 1/GLAN 2 ports
(X10DRT-H/HIBF)
Connect-X3 Port (X10DRT-HIBF)
•
Used as InfiniBand QDR 40 GT/s or FDR 56 GT/s
(4-channel) Small Form-factor Pluggable (QSFP)
Port
SATA Connections
•
SATA 3.0 Ten (10) SATA 3.0 Connections
•
RAID RAID 0, 1, 5, 10 (AHCI Controller)
1-7
Chapter 1: Overview