Yamaha YZF-R7 Owner's Service Manual page 321

Ofrecido por www.electromanuales.com
HANDLEBARS
6. Install:
• handlebar grip
a. Apply a thin coat of rubber adhesive
onto the end of the left handlebar.
b. Slide the handlebar grip over the end
of the left handlebar.
c. Wipe off any excess rubber adhesive
with a clean rag.
WARNING
WARNING
Do not touch the handlebar grip until
the rubber adhesive has fully dried.
7. Adjust:
• throttle cable free play
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY" in chapter 3.
Throttle cable free play (at the
flange of the throttle grip)
3 ~ 5 mm (0.12 ~ 0.20 in)
7 - 71
CHAS