Fuel Indicator Light Circuit Check; Digital Speedometer - Yamaha YZF-R7 Owner's Service Manual

Ofrecido por www.electromanuales.com
INSTRUMENT AND CONTROL FUNCTIONS
CB-46ECB-69E
Indicator comes on.
After a few seconds:
Indicator goes off.
OK. Go ahead with
riding.
1. Speedometer
2. Clock, odometer
3. "SELECT" button
4. "RESET" button

Digital speedometer

This speedometer is equipped with:
an odometer
two trip odometers
a fuel reserve trip meter
a clock
NOTE:
For UK models only:
To change the speedometer display
from kilometers to miles, press the "SE-
LECT" button for at least two seconds.

Fuel indicator light circuit check

Turn the main switch to "ON".
Indicator does not go off.
Inspect the fuel level.
Fuel level is OK.
Have a Yamaha
dealer inspect the
electric circuit.
Odometer and trip meter modes
Use the trip meters to estimate how far
you can ride on a tank of fuel.
Use the fuel reserve trip meter to see
the distance traveled from when the
fuel level dropped to the reserve level.
Selecting a mode
Push the "SELECT" button to change
between the odometer mode "ODO"
and the trip odometer modes "TRIP 1"
EAU01601
and "TRIP 2" in the following order:
"ODO" → "TRIP 1" → "TRIP 2" →
"ODO"
If the fuel level indicator light comes on
the odometer display will automatically
change to the fuel reserve trip meter
mode "TRIP F" and start counting the
distance traveled from that point. Push
the "SELECT" button to change be-
tween the fuel odometer, trip odometer
and odometer modes in the following
order:
"TRIP F" → "TRIP 1" → "TRIP 2" →
"ODO" → "TRIP F"
1 - 7
Indicator does not come
on.
Have a Yamaha dealer
inspect the electric
circuit.
Fuel level is low.
Supply recommended
fuel.
Resetting a meter
To reset a trip odometer to 0.0, select it
by pushing the "SELECT" button and
push the "RESET" button for at least
one second.
To reset the fuel reserve trip meter, se-
lect it by pushing the "SELECT" button
and push the "RESET" button for at
least one second. The display will re-
turn to "TRIP 1". If you do not reset the
fuel reserve trip meter manually, it will
automatically reset and return to "TRIP
1" after refueling and the motorcycle
has traveled 5 km (3.1 miles).
NOTE:
After the fuel reserve trip meter is reset,
the display always returns to the "TRIP
1" mode. If "TRIP 2" was being used
before the fuel reserve trip meter is re-
set, be sure to push the "SELECT" but-
ton to change back to the "TRIP 2"
mode.
EAU01295