Ericsson Dialog 4223 Professional User Manual page 103

Ô
Line 1
0
(
Ô Õ
Line 1
Exit
Dialog 4223 Professional/Dialog 4225 Vision
Program or change a ring signal
Press the corresponding Line key.
A digit (0–6) is shown in the display.
Note: If you do not want to change the programmed ring
signal, press
6
changes.
– )
Select the ring signal you want to use according to the list
below.
0 = Silent.
1 = Periodic ring signal.
2 = Delayed periodic ring signal.
3 = One muted ring signal.
4 = One muted delayed ring signal.
5 = Immediate Speech Connection with one ring signal
controlled by function key.
6 = Immediate Speech Connection with one ring signal.
Note: Options 5 and 6 are not available for multiple
represented lines.
Press.
Press to finish programming (see display).
to leave the menu without saving the
Exit
Settings
103