Table of Contents
Advertisement
A message appears in the display at the end of the programme
Message
Align the machine
Check dosage
Hygiene info
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
Cause and remedy
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
Check whether the washing machine is aligned
correctly as described in "Installation and
connection - Levelling the machine".
Check whether the maximum delivery height of
1 m has been exceeded.
If the fault message appears again, contact the
Service Department. The washing machine can still
be used but with reduced functionality.
Excessive foam has built up during washing.
Use less detergent next time, and follow the
manufacturer's recommended dosage amounts on
the packaging.
A programme using a temperature above 60 °C has
not been run for a long time.
In order to prevent bacteria and unpleasant odours
building up in the machine, run the Cottons 75 °C
programme using Miele machine cleaner or
powder detergent.
Problem solving guide
51
Advertisement
Table of Contents
