Stopping Scheduled Recording; Modifying Or Deleting A Recording Schedule - Lorex LW491HD User Manual

9 Recording
9. Press until all menus are closed.

9.2.2 Stopping Scheduled Recording

When the stop time arrives, the system stops recording automatically. If necessary, you
can stop schedule recording manually.
To stop schedule recording:
• Press to stop schedule recording.
NOTE
If you stop schedule recording before the end time, the system will automatically resume recording after
half an hour.

9.2.3 Modifying or Deleting a Recording Schedule

You can modify any recording schedule by adding or subtracting recording time.
To modify a recording schedule:
1. Press , then select Record. Push the joystick to confirm.
2. Select Schedule Recording.
3. Move the joystick up / down to select Modify and push the joystick to confirm.
4. Select which channels to change the schedule for by moving the joystick left / right to
move the cursor, then push the joystick to include or dismiss the channel.
5. Select the start time and end time for the modification. This could be a span of time
you wish to add to or subtract from an existing schedule. Move the joystick left / right to
move the cursor, then move the joystick up / down to change the start and end time.
NOTE
The time uses a 24-hour clock.
6. Select which days of the week to apply the modification to by moving the joystick left /
right to move the cursor, then push the joystick to include or dismiss a day.
7. Move the joystick left / right to select the type of modification:
• Select Save to add onto a continuous schedule.
• Select Motion, then Save to add onto a motion schedule.
• Select Delete to subtract from either type of schedule.
8. Press until all menus are closed.
To delete a recording schedule:
1. Press , then select Record. Push the joystick to confirm.
2. Select Schedule Recording.
3. Move the joystick up / down to select Modify and push the joystick to confirm.
4. Select which channels to delete the schedule for by moving the joystick left / right to
move the cursor, then push the joystick to include or dismiss the channel.
#LX400077; r.43964/43966; en-US
24