Setup Flow For Usb Printing - Toshiba e-STUDIO352 Quick Start Manual

Setup Flow for USB Printing

This equipment can be used as printer connected with a USB cable. When it is connected with a
USB cable, it does not require an initial setup. After you connect this equipment and your com-
puter, install the printer drivers and then it provides USB printing features.
USB printing is not available for Windows NT4.0 and Windows 98.
Setting up the USB Printer
Connection
Setup Flow
Connect this equipment
Install the Client Software
Configuring the Printer
Drivers
* It is only applicable for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO 281c/
351c/451c.
Connecting with USB
Description/Reference
Connect the machine and your computer with a USB or Parallel* cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"1.CONNECTING TO THE USB PORT"
Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide
Chapter 2 "INSTALLING CLIENT SOFTWARE FOR WINDOWS"
"Installing the Client Software for USB Printing"
Configure the options and department code.
Reference: Printing Guide
Chapter 5 "PRINTING FROM WINDOWS"
"Before Using the Printer Driver"
SETUP FLOW FOR PRINTING FEATURES
Windows 98
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
45