Toshiba e-STUDIO352 Quick Start Manual page 61

Setup Flow
Install the Client Software
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Mac OS X in a TCP/IP network
using CUPS. Even though IPP printing can be used in a local area network, this method is com-
monly used to print over the Internet. If you allow IPP printing through the Internet, you must
configure the DNS server to enable users to access this equipment over the Internet using the
HTTP protocol. This is useful when users want to print to this equipment from outside the local
area network.
IPP printing for Macintosh is available for Mac OS X 10.2.4 to 10.4.x.
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
Description/Reference
Install the Macintosh PPD file from the Client Utilities CD-ROM and creating
a printer.
Reference: Printing Guide
Chapter 3 "INSTALLING CLIENT SOFTWARE FOR MACINTOSH"
"Installing the Printer on Mac OS 8.6/9.x"
"Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x"
Connecting over TCP/IP Network
Setting up the IPP
printer connection
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
SETUP FLOW FOR PRINTING FEATURES
Mac OS X
59