Connecting To The Network - Toshiba e-STUDIO352 Quick Start Manual

CONNECTING TO THE NETWORK

The following describes how to connect this equipment to a network. The following image is for
the e-STUDIO352/452. It may be slightly different with your system.
The 10BASE-T or 100BASE-TX cable is an optional item. Please obtain one that is compatible
with your network.
1
Insert the 10BASE-T or 100BASE-TX
cable to the network interface con-
nector located on the rear side of
the machine body.
2
Turn ON the power of this equipment.
CONNECTING TO THE NETWORK 31