Setup Flow For Smb Printing - Toshiba e-STUDIO352 Quick Start Manual

5 SETUP FLOW

Setup Flow for SMB Printing

This equipment can be used with SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method to setting up the printer from the Windows 98/Me computers. However, SMB
printing is not suitable for printing a large amount of documents.
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, Windows Vista, or Windows Server 2003 as a print server, it is recom-
mended to set up for printing via Windows print server.
P.52 "Setup Flow for Printing via Windows Print Server"
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
48 SETUP FLOW FOR PRINTING FEATURES
Network Environment over TCP/IP
Setting up SMB
Printer Connection
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003