Toshiba e-STUDIO352 Quick Start Manual page 55

Setup Flow
Set up the IPv6
Set up the Printing Ser-
vice
Install the Printer Driver
on the Windows Print
Server
Configuring the Printer
Drivers
Setting up the Print
Server
Install the Printer Driver
on the Client computers
Description/Reference
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv6)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Enable the Raw TCP or LPD Printing Service using TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Print Service Settings"
"Setting up the Raw TCP Print"
"Setting up the LPD Print"
Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide
Chapter 2 "INSTALLING CLIENT SOFTWARE FOR WINDOWS"
"Installing the Client Software for Raw TCP/LPR Printing"
Configure the options and department code.
Reference: Printing Guide
Chapter 5 "PRINTING FROM WINDOWS"
"Before Using the Printer Driver"
Configure the printer on the Windows print server as shared printer.
Reference: Network Administration Guide
Chapter 1 "SETTING UP NETWORK SERVER"
"Setting up Windows Print Server"
Install the printer driver from the queue in the Windows print server by point
and print installation. This installation method is common for Windows print
sharing service. Please refer to the Windows documentation about the
installation from the Windows shared printer.
SETUP FLOW FOR PRINTING FEATURES 53