Receiving; Tuning Steps; Change The Tuning Step Of The [ Main Dial ] Knob; About The [ Up ] / [ Dwn ] Buttons Of The Mh-31B8 - Yaesu FT-410 Operation Manual

The tuning step of the [ MAIN DIAL ] knob on the
operating mode.
O
peraTing
M
[ MAIN DIAL ]
Ode
LSB/USB 10 Hz
CW 10 Hz
AM 1 kHz
DATA 10 Hz
 Pressing the [ FAST ] button will increase or decrease the tuning rate of the [ MAIN DIAL ] knob by a factor
of ten.
c t S
hANGe the uNiNG tep of the
1. Set the operating mode by pressing the [ MODE]
button.
2. Press and hold the [MENU] button for one second
to enter the Menu mode. The "Menu." will appear
on the display.
3. Rotate the [ MAIN DIAL ] knob to select the menu
item "Dial Step".
4. Press the [ MAIN DIAL ] knob to enable adjustment
of this menu item. The "Menu." will be blinking.
5. Rotate the [ MAIN DIAL ] knob to select the desired
tuning step described above.
(You may Press the [ MAIN DIAL ] button to reset the tuning step to the factory default.)
6. Press the [MENU] button. The "Menu." is displayed continuously.
7. Press and hold the [ M ENU] button for one second to save the new setting and return to normal operation.
A
bout the
 The microphone [ UP ] / [ DWN ] keys utilize the tuning steps of the [ MAIN DIAL ] knob on the SSB/CW/DATA
mode.
 When the microphone [ FST ] key is pressed, the tuning rate increases by a factor of ten, in a manner
similar to the effect of the transceiver front-panel [ FAST ] button.
FT-410 O
peraTiOn
t
uNiNG
[ mAiN diAl ] K
[ up ] / [ dwN ]
[ DWN ] Key
M
anual
S
tepS
M-012
Nob
M-012
[MAIN DIAL] knob
mh-31
buttoNS of the
[ FST ] Key
[ UP ] Key
r
eceiving
[FAST] button
14.195.000
[MAIN DIAL] knob
[MENU] button
14.195.000
[MODE] button
b8
Page 17