Receiving Aprs ® Beacons; Receiving Beacons - Yaesu FTM-200DE Instruction Manual

Receiving APRS

Receiving beacons

y Displaying beacons in the APRS pop-up screen
A alarm will sound when a beacon is received on the B band
frequency, and the APRS pop-up screen will be displayed.
The contents displayed in the [75 APRS POPUP] and the
"APRS STATION LIST DETAIL SCREEN" to be explained
next are basically the same.
y Displaying beacons in the APRS STATION LIST detail screen
1
Press the [F menu] key → [100 STATION LIST] → press the DIAL knob.
The APRS STATION LIST screen will be displayed.
2
Rotate the DIAL knob to select the beacon whose details
you want to review.
3
Press the DIAL knob to display the details screen.
Rotate the DIAL knob to scroll the screen.
4
Press the [SQL back] key.
Returns the screen to the APRS STATION LIST screen.
Tips
• When [71 APRS FILTER] is set to on, a received beacon matching the filter setting will be stored and
shown on the display.
• The receive audio (beacon or voice etc.) of B band when APRS is operating may be muted by setting
[74 APRS MUTE] in the setup menu.
• The reception of an APRS beacon is notified by a ringing sound set in [76 APRS RINGER] in the
setup menu. If "OFF" is selected, no audio alarm will sound upon receiving a beacon.
beacons
®
8
FT5D
15114km 15:36
Speed
Course
Alt
En Route
(
N 36 ̊ 43 . 17 �
E 139 ̊ 47 . 35 �
STATUS TEXT
[
STATION LIST ALL
1 E JA1ZRL- 9 15:36
2 E JA6YPC- 7 12:34
3 W JA1YOE-13 04:56
4 E JQ1YBF- 9 02/14
5 E JQ1YBG-14 02/03
6 E JA1ZRL- 9 01/28
02/22
0km/h
0 ̊
-m
)
]