Supplied Mh-31B8 Microphone - Yaesu FT-410 Operation Manual

s
upplied
1
1. PTT Switch
Press this Switch to transmit, and release it to
receive after your transmission is completed.
2. DWN Key
Press to tune down, hold to start scanning.
3. FST (FAST) Key
The FST Button on the transceiver should be set
for momentary operation.
4. UP Key
Press to tune up, hold to start scanning.
5. MIC
The microphone is located here. Speak into the
microphone in a normal voice level.
The microphone should be positioned within
2 inches (5 cm) from the mouth for optimum
performance.
Page 8
MH-31
b8
2 3 4
DWN FST UP
DYNAMIC MICROPHONE
MH-31
M
icrOpHOne
5
6
6. TONE Switch
Position 1 provides flat-audio-characteristic
transmit audio.
Position 2 attenuates low audio tones, for
improved clarity in moderate band conditions, or
if you have a naturally deep voice.
FT-410 O M
peraTiOn anual