Replacement Parts - Mitsubishi MJ-EZ6CX-S1-IT Service Manual

Once Every Three Months
Silver Ion Filter ( Soak in Water )
Soak the silver ion filter in water.
Press the POWER switch to turn off the power, wait until
the blower fan stops rotating (approximately 2 minutes)
before unplugging the power cord.
Remove the filter cover.
1
Remove the silver ion filter
2
from the filter cover.
3
Clean the filter.
Remove any dust from the
white net surface with the
nozzle of a vacuum cleaner.
Do not use a nozzle with a brush.
This may damage the filter.
Soak the silver ion filter
4
in water.
Do not use detergent or hot water. Also, do not
use a brush or the like to scrub the filter or rub
the filter while soaking. This may damage the filter.
Any yellow or dark stains may remain on the
filter, but should not affect performance.
The filter can be soaked for a total of eight
times. After that, replace with a new filter.
Dry the silver ion filter well.
5
Dry the filter
on a flat surface.
Set the silver ion filter into
6
the filter cover.
7
Set the filter cover.
Soak in cool to
lukewarm water
for about 30 minutes.
Note) This page is extracted from the instruction manual.

Replacement Parts

The silver ion filter becomes depleted over time.
Replace it when necessary.
Replacing the silver ion filter
Although the silver ion filter lasts roughly
2 years, replace it when:
You have soaked the filter 8 times.
●
The silver ion filter has turned brown
●
due to cigarette smoke or black with
dust.
Filter life differs on usage and environmental conditions.
Remove the filter cover from the unit,
and replace the silver ion filter.
Parts sold separately
Silver ion sterilizing and deodorizing filter
for replacement.
Type : MJPR-7AXFT
●
Please contact your nearest Mitsubishi Electric
dealer for purchase.
31