Data Management
The HeartSine Saver™ EVO software is an
optional accessory. Contact your authorised
distributor or HeartSine Technologies
directly about the After-Use Data
Management Service.
1. Connect the supplied USB cable to the
SAM 500P (see illustration below).
24
2. Connect the USB cable to a PC.
3. Launch the HeartSine Saver™
EVO utility.
Notice: The SAM 500P should
only be connected to an
IEC60950 PC.
Caution: You cannot defibrillate
while the SAM 500P is
connected to a PC.
For further information on this
optional accessory, contact your
authorised distributor or HeartSine
Technologies directly.