Preparation
6. Place the SAM 500P in its supplied
soft carry case. Store the SAM
500P in an unobstructed, secure
location in a
clean, dry environment
specifically where it will be seen and
heard. Be sure to store according to
specifications (see 'Technical Data'
on page 27).
Standby
temperature: (50 to 122 °F)
Relative
humidity:
Notice: HeartSine recommends
that you keep a spare Pad-Pak
with your SAM 500P. You can
store it in the rear section of
the soft carry case.
7. Complete the guarantee card and
return it to your authorised distributor
or HeartSine Technologies directly
(see 'Tracking Requirements'
on page 23).
16
0 to 50 °C
5 to 95%
(non-condensing)
Preparation checklist
Step 1. Check the Pad-Pak expiry date.
Step 2. Install the Pad-Pak.
Step 3. Check for a successful
completion of the self-test routine.
Step 4. Turn on to check operation.
Step 5. Turn off.
Step 6. Store the SAM 500P correctly.
Step 7. Register your SAM 500P.
Step 8. Create a service schedule
(see 'Service and Maintenance'
on page 22).