Table of Contents
Advertisement
Follow these instructions to install an add-on card:
1.
Remove a blanking plate from the system case corresponding to the slot you
are going to use.
2.
Install the 1.5V-keyed connector
of the add-on card into the ex-
pansion slot. Ensure that the
edge connector is correctly
seated in the slot.
3.
Secure the metal bracket of the card to the system case with a screw.
Note: For some add-on cards, for example graphics adapters and network adapters,
you have to install drivers and software before you can begin using the add-on
card.
22
Hide quick links:
Advertisement
Table of Contents
