Front Panel Connector - MATSONIC MS9127C User Manual

Front Panel Connector

The front panel connector (PANEL1) provides a standard set of switch and
LED connectors commonly found on ATX or micro-ATX cases. Refer to the
table below for information:
HD_LED_P
Hard disk LED pull up (330 ohm) to +5V
FP PWR/SLP
MSG LED pull up (330 ohm) to +5V
HD_LED_N
PANEL1
Hard disk active LED
GND
Ground
RST_SW_N
Reset Switch low reference pull down (100 ohm) to GND
PWR_SW_P
Power Switch high reference pull up (10000 ohm) to +5V
RST_SW_P
Reset Switch high reference pull up (1000 ohm) to +5V
PWR_SW_N
Power Switch high reference pull down (100 ohm) to GND
RSVD
Pin
Signal Name
Function
1
2
3
4
5
6
7
8
9
12