Pkm 9080 Instruction Manual page 38

6. Do not damage the grid of metal-made grease filters. The colour of the metal
surface may change due to frequent cleaning as well as the use of aggressive
detergents.
7. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
8. Do not use a steam cleaner. RISK OF ELECTRIC SHOCK!
9. Do not use any abrasive detergents.
WARNING!
You do not need to replace metal filters. Clean them once a month carefully by
hand or in a dishwasher (30
put the filter in the dishwasher together with tableware. Filters which are blocked
with food debris do not carry a guarantee. Dry the filters properly before you
reinstall them. Do not use any abrasive detergents! Do not use any alkaline
dishwasher-detergents!(ph more than 7).
Conventional carbon and active carbon filters cannot be cleaned. The capacity
of these filters is limited. You can use such filters for about 3-6 months. Replace a
depleted filter. You can receive further information on the filter-packaging.
1. Replace a defective illuminant immediately.
2. Disconnect the appliance from the mains.
3. Let the illuminant cool down before replacing.
4. Insert a small screwdriver into the gap between the illuminant and the housing
of the appliance.
Non-observance of the cleaning and maintenance
instructions will cause an increased risk of fire.
Replacing of grease filters
0
). Do not use any acrid or corrosive detergents. Do not
Carbon filters
Replacing of the illuminant-LED
38