Electrical Connection; Carbon Filters - Pkm 9080 Instruction Manual

1. An electrical supply of 220-240V AC / 50 Hz is required.
2. Only connect the appliance to a properly grounded and dedicated socket which
is near the appliance.
3. The appliance must be grounded. The appliance is equipped with a 3-pole
grounding plug. Use a suitable socket to minimize the risk of an electric shock.
4. If the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid any kind of hazard.
5. Check that the technical data of your energy supply meet the values on the
nameplate.
6. Your domestic circuit must be equipped with an automatic circuit breaker.
7. Do not attempt to repair the appliance alone. Repairs carried out by
unauthorized persons can cause serious damage. Always contact the nearest
service centre and use original spare parts only.
Do not use a socket board or a multi socket or an extension cord when
using 220–240 V/50 Hz alternate current (AC).All electrical connections
which may be damaged must be repaired by a qualified professional.
All repairs should be performed by your authorized after sales service.
1. Before you install any carbon filters: switch the appliance off and
disconnect it from the mains.
2. Remove the grease filters.
3. Fix the carbon filters on both sides of the motor. Turn the filters to fix them.
4. Reinstall the grease filters.
5. The suction capacity is decreased by installed carbon filters.
6. Carbon filters are not included in delivery.
7. Use carbon filters for extraction mode only.

Electrical connection

WARNING!

Carbon filters

35