Pkm 9080 Instruction Manual page 32

1. Position the suspension device on the wall. Choose a proper position which
meets the dimensions of the chimney.
2. Mark the position of the holes with a pencil.
3. Now drill the holes and fix the suspension device with the screws and
dowels/plugs.
4. Suspend the hood.
5. Now connect the exhaust hose to the corresponding outlet of the hood.
6. Install the exhaust hose to the corresponding outlet ( look at figure 1/2 ).
7. Now fix the chimney back brace onto the chimney.
8. Now fix the complete chimney onto the hood.
9. Fix the chimney mounting rail into the desired position on the wall with the
screws and dowels.
10. Pull the telescopic part to the mounting rail and fix it on the rail.
11. Put in the plug and insert the grease filters.
32