The Handy THDS Operator's Manual And Parts List page 4

STEP 3
1. As per Pic.5, place a Connect Pole onto the top of the leg and lock with a Carriage Bolt M6X35
and a Wing Nut M6.
2. Repeat to assemble the other Connect Pole. See Pic. 6.
STEP 4
1. As per Pic.7, attach the Handle with the Connect Pole, lock using a Hex Bolt M6X30 and a Wing
Nut M6 on the left.
2. On the right, insert the Adjustable Wire into the hole in the Index Plate, then attach the Index
Plate onto the Handle and Connect Pole using two Hex Bolts M6x30, one Lock Nut M6 and one
Wing Nut M6.
3. Insert the Wire Clip Bottom Plate onto the Connect Pole using a Hex bolt M6x30 and a Lock Nut
M6.
4. Fix the Wire Clip Plate to the Adjustable Wire and Wire Clip Bottom Plate using a Screw M5x10
and Lock Nut M5. See pic. 8.
4