Getting Help - Mobius ActionCam Instruction Manual

• Make sure the lens cap is removed.
• Make sure the parameter values for the "Advanced Image Settings" are correctly set. Extreme
values may cause unexpected results when lighting conditions change.
Q. Playback is erratic or stutters or the playback colors are psychedelic or the video flashes, has
corrupted blocks etc.
A. Always first copy the video file from the memory card to your hard drive.
• Your PC or graphics card may not be powerful enough to playback the video stream.
• You may not have enough memory installed in your PC.
• Use VLC Media Player. Window Media Player often chokes on underpowered machines.
• Psychedelic colors may also indicate problems with the CMOS lens module. Make sure the
CMOS lens cable is correctly seated and not cracked. The lens cable is very fragile.
Q. There is a distinctive buzzing or clicking noise when videos are played back.
A. Only use quality micro SD cards with a class rating of 4 or above. Low quality cards can draw
excessive current which may result in electrical noise in the recording.
Q. When I update the firmware the blue LED remains on for about 2 seconds and then the yellow LED
remains on. The firmware is not updated, but the firmware file is deleted from the card.
A. Firmware must be updated using an SD card formatted in FAT32. In firmware versions up to v2.03
larger cards with a capacity of 64GB and above are formatted with exFAT. New cards with a capacity
up to 32GB are formatted with the FAT32.

Getting Help

This camera, together with the #16, is the best supported camera of it's kind. In case of problems or
questions your first stop should be a visit to:
http://www.rcgroups.com/forums/showthread.php?t=1904559.
This thread is dedicated to questions related to the Mobius ActionCam. It should be noted that the
forum is for aerial RC discussions only, so please avoid post anything off-topic. The first 5 posts
contain links to all the important information.
This manual was last updated on 23 January 2015