Table of Contents
Advertisement
Manual/automatic tuning
Automatic tuning: Press LEFT/RIGHT cursor buttons or touchable
start. It will play when finds the station with strong signal. Press it again to search for a following station.
Press and hold for 2 seconds a number button to store the station found.
Manual tuning: Press and hold LEFT/RIGHT cursor buttons or touchable
manual search mode. Press LEFT/RIGHT cursor buttons or touchable
a frequency manually. Press and hold for 2 seconds a number button to store the station found.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 MW), 6 stations in each band.
To store a station:
-
Select a band (if needed)
-
Select a station
-
Press and hold a preset button (1-6) that you want store the station for at least 2 seconds.
To recall a station:
-
Select a band (if needed)
-
Press a Preset button (1-6) briefly to recall the stored station
Preset scan function
Preset scan: Press RPT/P.SCN button on the RC or touchable PSCN button to scan all preset stations in the
memory of the current band and stay on each memory stations for about 5 seconds. To stop preset scan,
press this button again.
Auto memory store: Press and hold for 2 seconds RPT/P.SCN button on the RC or touchable PSCN button
to enter auto store mode. The radio will automatically store the 6 strongest available stations to the 6 preset
memories of the current band. To stop auto store, press this button again.
/
20
buttons, the automatic search will
/
buttons to switch on the
/
buttons to increase or decrease
Advertisement
Table of Contents
