Hyundai H-CMMD4046 Instruction Manual

Hyundai H-CMMD4046 Instruction Manual

Multimedia dvd-receiver with motorized 7” tft display
Hide thumbs Also See for H-CMMD4046:

Advertisement

Quick Links

H-CMMD4046
MULTIMEDIA DVD-RECEIVER WITH MOTORIZED 7" TFT DISPLAY
Instruction manual
DVD-
7"
TFT

Advertisement

Table of Contents
loading

Summary of Contents for Hyundai H-CMMD4046

  • Page 1 H-CMMD4046 MULTIMEDIA DVD-RECEIVER WITH MOTORIZED 7” TFT DISPLAY Instruction manual DVD- 7”...
  • Page 2: Table Of Contents

    Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ...............................2 Important safeguards ............................3 Accessory List ..............................4 Installation/Connection............................5...
  • Page 3: Important Safeguards

    Important safeguards Using the device at temperature below -10º may cause the breakage of the device. Before using please heat up the passenger compartment to the recommended temperature! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
  • Page 4: Accessory List

    Accessory List Receiver 1 pc Front Panel 1 pc Panel protective case 1 pc Unit Remote Control 1 pc Second Monitor Remote Control 1 pc TV tuner 1 pc TV antenna 1 pc TV cable 1 pc ISO connector 1 pc 2 side tape 1 pc Mounting parts:...
  • Page 5: Installation/Connection

    Installation/Connection This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to support the unit. Installation 1. Insert the half sleeve into the dashboard (1), and bend the mount tabs outwards to fix it. 2.
  • Page 6 Electrical connection Note: For your driving safety, please link your parking wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot display video picture of the disc.
  • Page 7 Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
  • Page 8: Unit Controls

    Unit controls Front panel REL button AF/REG button PTY button Mini LCD P.SCAN button OPEN button VOL knob/SEL button TP/LOUD button Disc slot 10 MODE button 11 1/PLAY/PAUSE button 12 2/3/PREV/NEXT buttons 13 POWER button 14 4/RPT/REW/5/INT/FWD buttons 15 6/STOP/RDM button 16 MUTE button 17 EJECT button 18 IR sensor...
  • Page 9 Monitor 1. BAND button 2. DIS/OSD button 3. MENU button 4. SETUP/IN/OUT button 5. TILT button Inner panel 1. RESET button 2. SD/MMC card slot...
  • Page 10: Remote Controllers (Rc)

    Remote controllers (RC) Main monitor RC 1. STANDBY button 2. IN/OUT button EJECT button OSD button SETUP button Cursor buttons LEFT/RIGHT/UP/DOWN PROG/REW button SEL button VOL- button 10 AF button 11 AUDIO button 12 RDM/BAND button 13 INT/PTY button 14 Number buttons 15 RPT/P.SCAN button 16 TP/LOUD button 17 SUBTITLE button...
  • Page 11 23 PREV/NEXT buttons 24 ENTER button 25 MENU button 26 MODE button 27 MUTE button 28 TILT button 29 OPEN button Second monitor RC Number buttons AUDIO button SUB button MUTE button Cursor buttons/PREV/NEXT buttons MENU button PLAY/PAUSE button RPT/P.SCAN button MODE button...
  • Page 12 Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control Pic.
  • Page 13: Monitor Operations

    Monitor operations Open/close TFT monitor 1. Press the OPEN button on the panel to open the monitor to the last viewing position. 2. Press the OPEN button to load the monitor to the unit. Notes: If the monitor is turned to the left or right, you cannot close it (pic 1). The monitor can be turned to the left or right at 30°...
  • Page 14 resumed after the following action of the monitor performed by pressing OPEN button or repowering the unit. If it doesn’t help, please reset the unit.
  • Page 15: Touch Screen Operations

    Touch screen operations In any mode touch the left corner of the top area of the TFT display to open the source menu. Touch any point of the up right corner to display dual zone menu. Now you may touch and choose any option to operate. Source menu TUNER MEDIA (DVD PLAYER, CAMERA, SD CARD, AV IN, TV MODE)
  • Page 16 Audio setup menu BASS TREBLE BALANCE (right and left channels) FADER (front and rear channels) S.WOOFER – subwoofer on/off S.VOLUME – initial volume level when the unit is on. TEL VOL (option) Video setup menu BRIGHT CONTRAST COLOR SHARP SCREEN (only in DVD mode) System setup menu BEEP –...
  • Page 17: General Operations

    General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button on the inner panel to restore the unit to the original factory settings. Power on/off Press POWER button on the front panel or the STANDBY button on the RC to turn the unit on.
  • Page 18 If you don’t adjust the setting within 3 seconds after selecting the setting, the unit will automatically return to the current mode being displayed. Mode selecting Press MODE button repeatedly to select the source: TUNER => DVD => SD/MMC => AUX IN => R. CAM => TV TUNER.
  • Page 19: Radio Operations

    Radio operations Mode selecting Press MODE button repeatedly to select TUNER mode. If the monitor is open, the tuner control menu will appear on the screen. Touch upper left corner on the screen to open the source menu. Then press touchable TUNER icon to open the tuner control menu.
  • Page 20 Manual/automatic tuning Automatic tuning: Press LEFT/RIGHT cursor buttons or touchable buttons, the automatic search will start. It will play when finds the station with strong signal. Press it again to search for a following station. Press and hold for 2 seconds a number button to store the station found. Manual tuning: Press and hold LEFT/RIGHT cursor buttons or touchable buttons to switch on the manual search mode.
  • Page 21 RDS (Radio Data Service) function Note: RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Press AF/REG, PTY or TP/LOUD buttons on the unit or AF, INT/PTY or TP/LOUD buttons on the RC, or press touchable RDS MENU button to enter the RDS menu.
  • Page 22: Disc Operations

    Disc operations Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
  • Page 23 Discs for playback This unit can play disc types: CD/DVD/CDDA/CD-R/-RW/DVD±R/±RW. Compatible with formats: DVD-video/SVCD/VCD/HDCD/MP3/MP4/WMA/Picture-CD/JPEG. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg) ISO 9660 or ISO 9660 +Joliet format - Max.
  • Page 24 Loading a disc 1. Turn the power on. 2. Insert the disc with the printed side facing upward into the slot. The unit will switch to DVD mode automatically. 3. Press EJECT button on the panel or the RC to eject the disc. Touchable playback control menu Press the center of the lower part of the touchable screen to open the playback control menu.
  • Page 25 Direct entering the number Press number 0-9 buttons to directly input the track/chapter number. To input 2- or 3-digit number s of tracks and chapters press and hold buttons with corresponding numbers in turn on the RC. E.g., to input 135, press 1 => 3 => 5. Fast forward and backward playback During playback press REW/FWD button on the panel, or DISP/FWD or PROG/REW buttons on the RC or touchable...
  • Page 26 Random playback (for DVD/CD/VCD/MP3 discs) During disc playback, press STOP/RDM button on the panel or RDM/BAND on the RC to start random playback of the disc. Press again to cancel. Intro playback (for CDDA/VCD discs) You can play the beginning of every track for 10 seconds in sequence. Press and hold INT/PTY button on the RC or INT/FWD button on the panel to start intro play of whole disc.
  • Page 27 4. Press MENU button to return to menu. Programming the playback 1. Press and hold PROG/REW button on RC to enable the program function. 2. Press the digital buttons to insert the desired title/chapter number (for DVD) or track number (for VCD/CD) into the first position selected.
  • Page 28 Mixed file type disc operations When you use a disc containing various types of files (audio, video, pictures), a playback control menu for these files will appear on the screen. To select a folder or a track use cursor buttons and ENTER button. Press PLAY/PAUSE button to start playback of the selected track.
  • Page 29: Mp3 Overview

    MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write.
  • Page 30 Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate o f 128 kbps. DO NOT store more than 448 MP3 files per disc. For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder).
  • Page 31: Tv Tuner Operations

    TV tuner operations Connect TV tuner and TV antenna as it is shown on electrical connection diagram. Note: There is a 2-side tape in the accessories; you can use it to fix the TV box to your car. Switch to TV tuner mode Connect the TV set to the unit.
  • Page 32 Manual tuning Press and hold for 2 seconds LEFT/RIGHT cursor buttons repeatedly to search the TV stations step by step. Auto preset memory 1. Press and hold for 2 seconds P.SCAN button on the panel or RPT/P.SCAN button on the RC to start auto tuning;...
  • Page 33: Av In Mode

    AV IN mode This mode is for using the unit as an AV signal amplifier or connecting the rear-view camera. Connect the peripheral device (DVD player, video-camera, rear-view camera etc) to the unit via RCA output and AV in. The unit will be switched into the AV IN mode and will show the picture from the device connected. You can use VOL knob or functional buttons to set the video and audio parameters from the unit.
  • Page 34: System Setup Menu

    System setup menu 1. Press SETUP button on the RC to display the setup screen. 2. Use LEFT/RIGHT cursor buttons to select the desired menu: General setup, Audio setup, Video setup, Preference page or Password setup. 3. Press DOWN button to enter the menu. 4.
  • Page 35 This function doesn't work when the disc is without caption. If the caption is OFF, press SUBTITLE button on the RC to make caption on. The default setup is ON. LAST MEMORY When this function is on, the unit can memorize the time elapsed from the last time you played the disc. Then at the next playing, it will resume playing from the memorized time.
  • Page 36 L-Mono: left output signal. R-Mono: right output signal. Mix-Mono: left and right output average signal. DYNAMIC If watching large dynamic scope movie program at night, to select this mode you can reduce the volume to a very low level, at the same time, to keep the fine details sounds. In this case, this doesn't disturb the family and keep the quality sounds.
  • Page 37 Video setup page Video setup page QUALITY Sharpness - SHARPNESS, BRIGHTNESS, CONTRAST, GAMMA, HUE, Brightness SATURATION, LUMA DELAY Contrast You can set the color settings according to your preference. Gamma Saturation Luma delay Sharpness Preference page Preference page TV TYPE TV type This unit is suitable for all kinds of TV systems.
  • Page 38 Otherwise the disc default value works. And these settings can be changed respectively by pressing AUDIO and SUBTITLE buttons when playing. PARENTAL The control level is for parental to control playing content and protect your children from violence and erotic. The disc, the level of which is higher than the setting level cannot be played. DEFAULT Reset to the initial factory setups Password setup page...
  • Page 39: Other Options

    Other options Rear Camera You need to connect the rear camera wire “REVERSE” of the unit to the control connect of the rear camera. The Video IN wire of the unit “CAMERA” connect to the Video OUT of the camera. The unit will change Video Mode automatically Press MODE or OSD buttons to select CAMERA in order to change the mode to Rear Camera Mode.
  • Page 40: Anti-Theft System

    Anti-theft system This unit is equipped with a mask panel, which can be detached and taken with you, helping to deter theft. Detaching the front panel 1. Press POWER button to turn the power off. 2. Press REL button on the front panel and pull it towards you and slightly to the left. 3.
  • Page 41: Handling And Cleaning Discs

    Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
  • Page 42: Troubleshooting Guide

    Troubleshooting guide Symptom Cause Solution No power The car ignition is not on. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot be loaded. Presence of disc inside the player.
  • Page 43: Specification

    Specification General Power supply: 12 V DC Current consumption: max. 10 A Maximum power output: 50 W x 4 channels Compatible formats: DVD/SVCD/VCD/HDCD/MPEG4/MP4/WMA/CDDA/Picture-CD/JPEG/ CD-R/-RW/DVD±R/±RW playback Dimensions (L x W x H) / weight: 78 x 190 x 50 mm / 2.5 kg Working temperature range: -20º...
  • Page 44 Preset memory stations: DVD player Signal / Noise Ratio 90dB Dynamic Range 90 dB Distortion 0.1% Frequency Range 20Hz ~ 20KHz Maximum Output Power 50 Wx4 Loaded Impedance AUX IN Distortion 0.5% Frequency response 20Hz ~ 20KHz Audio Input level 1 Vrms Audio specification Audio Output Impedance...
  • Page 45 ..............................45 ..........................46 ............................47 ..........................48 ...........................52 ..........................57 .........................59 ............................61 ............................63 ............................67 ..........................68 3 ..............................74 ..........................76 AV ...............................78 ............................79 ..........................84 ..........................85 ............................86 ....................87 ........................88...
  • Page 46 -10º...
  • Page 47 (B5X20) (M5X6)
  • Page 48 ~ 4,5 – 5,5...
  • Page 51 ISO, (+)--- (-)--- (+)--- 12 (+)/ (-)--- (+)--- ((-)--- ACC+/ (+)--- (-)---...
  • Page 52 AF/REG P.SCAN OPEN VOL/ TP/LOUD MODE 1/PLAY/PAUSE 2/3/PREV/NEXT POWER 4/RPT/REW/5/INT/FWD 6/STOP/RDM MUTE EJECT ENTER BAND...
  • Page 53 BAND DIS/OSD MENU SETUP/IN/OUT TILT RESET SD/MMC...
  • Page 54 STANDBY IN/OUT EJECT SETUP PROG/REW VOL- AUDIO RDM/BAND INT/PTY RPT/P.SCAN TP/LOUD SUBTITLE A-B/ZOOM VOL+ GOTO/STOP PLAY/PAUSE DISP/FWD...
  • Page 55 PREV/NEXT ENTER MENU MODE MUTE TILT OPEN AUDIO MUTE PREV/NEXT MENU PLAY/PAUSE RPT/P.SCAN MODE...
  • Page 56 . 1). (CR 2025 3V), . 2). – 6...
  • Page 57 OPEN, OPEN, 30° TILT...
  • Page 58 OPEN OPEN RESET,...
  • Page 59 TUNER: MEDIA: , AV IN, TV. BLUETOOTH ( DUAL ZONE: SETUP: NAVIGATION: SOUND: DISPLAY: SYSTEM: RDS SETTING: RDS ( . 65 TV MODE: CALIBRATION:...
  • Page 60 BASS – TREBLE – BALANCE – FADER – S.WOOFER – S.VOLUME – TEL VOL ( BRIGHT – CONTRAST – COLOR – SHARP – SCREEN – DVD). BEEP – TILT – TILT RANGE – IN/OUT FIX – TIME SET – GPS DUAL SOUND –...
  • Page 61 RESET. POWER STANDBY STANDBY POWER VOL+/COL- VOL+/-,...
  • Page 62 SEL, BASS ( ) TREBLE ( ), BALANCE L-R ( ), FADER ( ), BRIGHT ( ), CONTRAST ( ), COLOUR ), SHARP ( MODE, : TUNER ( ) => DVD ( ) => AUX IN ( ) => SD/MMC ( ) =>...
  • Page 63 MODE, TUNER B ND RDM/BAND BAND, : FM1, FM2, FM3, MW1 (AM1), MW2 (AM2).
  • Page 64 (18 FM, 12 AM). 1~6 ( 1~6 (...
  • Page 65 RPT/P.SCN PSCN, RPT/P.SCN PSCN, 6 RDS ( AF/REG, PTY TP/LOUD AF, INT/PTY TP/LOUD RDS MENU, RDS. AF ( AF/REG...
  • Page 66 TA ( TP/LOUD, TP RDS TP/TA TP/TA PTY ( RDS, PTY, ENTER, PTY, 1~6, 1~6,...
  • Page 67 PBC ( – PBC, –...
  • Page 68 CD/DVD/CDDA/CD-R/-RW/DVD±R/±RW. : DVD-video, SVCD/VCD/HDCD/MP3/MP4/WMA/ Picture-CD/JPEG. : MP3 (*.mp3) WMA (*.wma) : MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) : JPEG (*.jpg) ISO 9660 ISO 9660 + Joliet - – 448. – 99. - 99 44,1 : 32 - 320 : *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, DRM.
  • Page 69 DVD. EJECT PLAY/PAUSE STOP/RDM GOTO/STOP PLAY/PAUSE PREV NEXT...
  • Page 70 (1-9, 0) 135, 1=>3=>5. REW/FWD DISP/FWD PROG/REW 2 => 4 => 8 => 16 => X32. PLAY/PAUSE, RPT/P.SCAN 4/REW/RPT VCD/CD: REPEAT TRACK ( ) => REPEAT ALL ( DVD: REPEAT CHAPTER ( ) => REPEAT TITLE ( ) => REPEAT ALL ( ) =>...
  • Page 71 A-B/ZOOM DVD/CD/VCD/MP3) RDM/BAND STOP/RDM INTRO ( CDDA/VCD INT/PTY INT/FWD CD/VCD/DVD AUDIO, CD/VCD AUDIO, : Left channel ( ) => Right channel ( ) => Stereo ( MENU, ENTER MENU.
  • Page 72 PBC ( PBC, MENU PREV/NEXT PLAY/PAUSE, MENU, – PROG/REW DVD) VCD/CD), ENTER. ENTER.
  • Page 73 DISP DVD/VCD A-B/ZOOM : 2 => 3 => 4 => 1\2 =>1/3 =>1/4 => SUBTITLE (GOTO) ( DVD/VCD) GOTO/STOP, ENTER. PLAY/PAUSE...
  • Page 74 MPEG 3 CD-ROM, CD-R CD-RW. ISO 9660. “.mp3”. “.mp3”, “ MP3” “ ”, PC “ ” “ ” 448. (VBR), WMA (Windows Media Audio) – Microsoft Corporation.
  • Page 75 , 64 CD-R CD-RW, MP3: 44,1 ISO 9660, CD-R MP3 CD-R CD-RW CD-R CD-RW CD-R CD-RW 1. ID3TAG.
  • Page 76 MODE, TUNER ( MEDIA TV MODE TV SYSTEM: PAL SECAM. TV SOUND: B/G, I, D/K. PAL: SOUND-1 B/G, SOUND-2 I, SOUND-3 D/K. SECAM: SOUND-1 B/G, SOUND-2 L/L`, SOUND-3 D/K. SOUND-3,...
  • Page 77 P.SCAN RPT/P.SCAN PLAY/PAUSE GOTO/STOP P.SCAN RPT/P.SCAN PLAY/PAUSE GOTO/STOP PREV/NEXT.
  • Page 78 (DVD . .). – AV IN MODE. MEDIA AV IN...
  • Page 79 SETUP, ENTER SETUP. 4:3 PS: 4:3 LB: 16:9:...
  • Page 80 SUBTITLE SPDIF DOLBY Pro LOGIC. DDigital Surround: HDCD DOLBY SURROUND. SPDIF SPDIF SPDIF SPDIF/RAW: SPDIF/PCM: LPCM...
  • Page 81 DOLBY DIGITAL BASS, 3D (3D HDCD ., 1...
  • Page 82 PAL, NTSC Multi. Multi: NTSC: PAL: PBC.
  • Page 83 AUDIO SUBTITLE => 136900 (...
  • Page 84 “REVERSE” VIDEO IN CAMERA VIDEO OUT « » MODE CAMERA, « ». MODE : DVD => SD => AUX IN => TV ( ) => OFF. “DUAL ZONE”, DUAL OFF, DUAL ZONE.
  • Page 85 POWER, . 2).
  • Page 87 “ ”.
  • Page 88 : 50 DVD/SVCD/VCD/HDCD/MP3/MPEG4/WMA/CDDA/Picture-CD/J PEG/ CD-R/ -RW/DVD±R/±RW 178 190 50 / 2,2 -20º - +60º CD, 120 7” 480( 234 (H) 16:9/4:3 300:1 110/130 87.5 ~108 (S/N 30dB):...
  • Page 89 522-1620 0.1% AUX IN 0.5 % 1 Vrms 2.5 Vrms 1.0±0.2V (CVBS) . 2000...
  • Page 90 PAL/SECAM/NTSC...

Table of Contents