Table of Contents
Advertisement
a)
Setting cup/jug
' In the case of normal coffee cup heights, fold the
beverage shelf down and place the cup on it.
( In the case of mugs or jugs, fold the beverage
shelf up and place the container on the drip tray.
) Place the chosen container centrally under the
beverage outlet.
An optional spout extension is available for filling
➄
larger jugs.
b) Product selection
Press the key for the desired product. According
❍
to the setting made in the manager functions
(page 17) ...
–
a single press of the key is sufficient to
dispense a dosed volume into the cup/jug,
–
dispensing can be stopped when desired by
pressing the key again,
–
the user must keep the key pressed as long
as dispensing is desired (dosed jug filling).
The product names displayed in the control
❍
panel and in the menus can be changed on
request by our Technical Service staff.
In the manager functions (p. 17), the machine
❍
can be set to dispense products with or without
external registration.
d) Dispensing remaining volumes
Before switching off or cleaning the machine, any
remaining coffee in the storage urn can be dispensed.
This is described in detail under the menu item
"Cleaning" on page 23.
➂
15
)
'
(
➄
!
GB
Advertisement
Table of Contents
