Table of Contents
Advertisement
Protect file by setting HDD property to Read-only
Steps:
1.
Enter HDD setting interface.
Menu> HDD
2.
Click
to edit the HDD you want to protect.
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing
Note:
HDD Group.
3.
Set the HDD property to Read-only.
4.
Click OK to save settings and back to the upper level menu.
Notes:
1.
You can't save any files in a Read-only HDD. If you want to save files in the HDD, change the property to
R/W.
2.
If there is only one HDD and is set to Read-only, the NVR can't record any files. Only live view mode is
available.
3.
If you set the HDD to Read-only when the NVR is saving files in it, then the file will be saved in next R/W
HDD. If there is only one HDD, the recording will be stopped.
Figure 5. 29 Unlocking Attention
Figure 5. 30 HDD General
Figure 5. 31 HDD General- Editing
67
Hide quick links:
Advertisement
Table of Contents
