2)
You can edit the IP address, protocol, management port, and other information of the IP camera to
be added.
3)
Click Add to add the camera.
•
OPTION 2:
Steps:
1.
Enter the Camera Management interface.
Menu> Camera> Camera
2.
Repeat the step 1 and 2 of adding IP cameras manually to add the camera.
3.
(For the encoders with multiple channels only) check the
shown in the following figure, and click OK to finish adding.
Figure 2. 15 Main Menu
Figure 2. 16 IP Camera Management Interface
of Channel No. in the pop-up window, as
checkbox
28