Configuring Hdd Error Alarms - kobi NET--IP-4CH User Manual

10.7 Configuring HDD Error Alarms

Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Steps:
1. Enter the Exception interface.
Menu > Configuration > Exceptions
2. Select the Exception Type to HDD Error from the dropdown list.
3. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 10. 22.
The alarm type can be selected to: Audio Warning, Notify Surveillance Center, Send Email and
Note:
Trigger Alarm Output. Please refer to Chapter Setting Alarm Response Actions.
4. When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from the list
below.
5. Click the Apply button to save the settings
Figure 10. 22 Configure HDD Error Alarm
147