Configuring Ptz Settings - kobi NET--IP-4CH User Manual

4.1 Configuring PTZ Settings

Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
2. Choose the camera for PTZ setting in the Camera dropdown list.
3. Enter the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
Note:
Example: If the PTZ camera uses the protocol of DRAGON, you should select DRAGON in the PTZ
Protocol field.
4. Click Apply button to save the settings.
Figure 4. 1 PTZ- General
42