Configuring High-Speed Download - kobi NET--IP-4CH User Manual

2) External Port indicates the port No. for port mapping in the router.
3) The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the
other ports should be between 1 and 65535 and the value must be different from each other. If multiple
devices are configured for the UPnP™ settings under the same router, the value of the port No. for each
device should be unique.
2) Click Apply button to save the settings.
3) You can click Refresh button to get the latest status of the port mapping.

9.2.11 Configuring High-speed Download

Purpose:
You can enable the High-speed Download function to widen the outgoing bandwidth of the device. In this way you
can speed up the download of record files through IE browser or CMS software.
If you enable the high-speed download function, the local menu operation will be affected. It is
Note:
recommended to disable this function after finishing the remote downloading of record files.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 9. 14.
3. Check the checkbox of Enable High-speed Download. And click the OK button in the pop-up message box
to confirm the settings.
Figure 9. 25 High-speed Download Settings Menu
Figure 9. 23 External Port Settings Dialog Box
Figure 9. 24 UPnP™ Settings Finished-Manual
127