Setting Sensor Alarms - kobi NET--IP-4CH User Manual

8.2 Setting Sensor Alarms

Purpose:
Set parameters and handling action of an external sensor alarm.
Steps:
1. Enter Alarm Settings of System Configuration and select an alarm input.
Menu> Configuration> Alarm
Select Alarm Input tab to enter Alarm Input Settings interface.
Figure 8. 4 Alarm Status Interface of System Configuration
2. Set up the handling action of the selected alarm input.
Check the Enable checkbox and click
3. Select Trigger Channel tab and select one or more channels which will start to record or become full-screen
monitoring when an external alarm is input.
4. Select Arming Schedule tab to set the channel's arming schedule.
Choose one day of a week and Max. eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.
Note:
5. Select Linkage Action tab to set up alarm response actions of the alarm input (please refer to Chapter
button to set up its alarm response actions.
Figure 8. 5 Alarm Input Setup Interface
104