Editing The Connected Ip Cameras And Configuring Customized Protocols - kobi NET--IP-4CH User Manual

2.3.2 Editing the Connected IP cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
2. Click OK to save the settings and exit the editing interface.
To edit advanced parameters:
1. Drag the horizontal scroll bar to the right side and click the
Figure 2. 17 Selecting Multiple Channels
Figure 2. 18 Edit the Parameters
icon.
29