Configuring Redundant Recording - kobi NET--IP-4CH User Manual

5.7 Configuring Redundant Recording

Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in the
redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Select the HDD and click
1) Set the HDD property to Redundancy.
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Note:
Redundant. For detailed information, please refer to Chapter 10.3 Managing HDD Group. There should be at least
another HDD which is in Read/Write status.
3. Enter the Record setting interface.
Menu> Record> Parameters
1) Select Record tab.
Figure 5. 22 HDD General
to enter the Local HDD Settings interface.
Figure 5. 23 HDD General-Editing
63