Getting Started; Location; Setting Up - BT STUDIO 2300 User Manual

Getting started

Location

You need to place your BT Studio 2300 within 2 metres
of a mains power and telephone socket so that the
cables will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Studio 2300 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.

Setting up

1. Plug the power adaptor and telephone cable into the
back of the base.
2. Plug the power adaptor into the mains wall socket and
switch the power on. When connected correctly, the
green Power light on the base comes on.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Studio 2300 – Issue 2 – Edition 01 – 19.09.05 – 7087
WARNING
Do not place your BT Studio 2300
in the bathroom or other humid
areas.
Handset range
The BT Studio 2300 has a range of
300 metres outdoors when there is
a clear line of sight between the
base and handset. When there is
no clear line of sight between the
base and handset, e.g. base
indoors and handset either indoors
or outdoors, the range could be
reduced to 50 metres. Thick stone
walls severely affect the range.
Signal strength
The symbol on your handset
screen indicates when you are in
range. When you are out of range,
it flashes.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base must be plugged into the
mains power at all times.
Which socket?
Power socket
Telephone line socket
7