Access Code And Entering A Pause; Recall - BT STUDIO 2300 User Manual

Access code and entering a pause

If you are connecting your BT Studio 2300 to a switchboard/PBX you may need to prefix
stored numbers with an access code (e.g. 9) in order to get an outside line. So that the
switchboard has time to pick up an outside line, you may also need to add a Pause after
the access code.
PABX access code
1. Press Menu then scroll
2. Scroll to PABX access code
Set Code
3. Display shows
4. Enter your PABX access code and press Save.
5. Scroll to ON and press OK.
6. Press and hold Back
Entering a pause
A pause is entered when storing a number in the phonebook (see page 22) or PABX access
code by pressing and holding the

Recall

R
The (Recall) button is used when connected to certain switchboards (PBXs) and with
some BT Calling Features, or equivalent services available via your Network Provider.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Studio 2300 – Issue 2 – Edition 01 – 19.09.05 – 7087
to Handeset and press OK.
and press OK.
. Press OK.
to return to standby.
button until the display shows
Vol
General information
P .
65