BT STUDIO 2300 User Manual page 55

Problems
You cannot link up
with the base
No ring on the handset
Buzzing noise on my
radio, TV, computer
or hearing aid
The charging does not
appear to be working
If you experience any problems, please call the Helpline on 0870 605 8047
BT Studio 2300 – Issue 2 – Edition 01 – 19.09.05 – 7087
Possible cause
Is the display flashing
connected to the mains power and switched on.
Are you are out of range? Move the handset closer to
the base.
Are the batteries low or flat? If so, charge the batteries
or replace them if necessary.
If using more than one base, check that you are connected
to the correct base, see page 53.
Check that the ringer volume is switched on, see page 43.
Check that the base is plugged into the phone socket
and that it is also connected to the mains power and
switched on.
Sometimes, your BT Studio 2300 and other DECT GAP
compatible handsets can interfere with other electrical
equipment if placed too close. Try moving it at least one
metre away from such appliances.
Check that the base is plugged into the mains socket
and switched on.
? Check that the base is
Help 55