Change Remote Access Security Pin Code; Switch Answering Machine On; Check For Messages - BT STUDIO PLUS 5500 User Manual

Change remote access security PIN code

1. Press the button, the display shows
2. Press or
to select.
3. Press or
is displayed, enter the current PIN and press
4.
OlD Pin?
is displayed, enter your new PIN and press
5.
neW Pin?
Re-enter the new PIN when the display shows
and press .
6. Press and hold to return to standby.

Switch answering machine on

If you forget to switch on your answering machine before leaving
home, you can do it from another phone.
1. Dial your phone number and after 20 rings your BT Studio
Plus 5500 will answer. When the message starts press
you will hear, "Please enter your security code". Enter your
4-digit code.
2. Press to switch the answer machine on.
7

Check for messages

1. Dial your phone number. When you hear your outgoing
*
message, press . You will hear, "Please enter your
security code".
2. Enter your 4-digit code and your machine announces
"To hear main menu, press 1. Press 1 to listen to menu options
or press 2 to play all messages". The new messages are then
automatically played back to you.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
anS Machine
until is displayed and press
anS SeTTingS
to display
change Pin
, press .
and press .
.
.
cOnFirM?
*
and
Keep a note of your remote access
security PIN code by writing it in
the space provided on page 48.
The default PIN setting is 0000.
If you enter the incorrect PIN code,
you will hear "Incorrect security
code". You have two chances to enter
the correct remote access security
code before your BT Studio Plus 5500
hangs up.
Time saver
If you have set the answer delay to
Time Saver, your answering machine
will answer after 2 rings if you have
new messages. If you do not have new
messages it will answer after 6 rings.
This enables you to hang up if you
hear more than 2 rings before you are
connected, saving you the cost of a
call. See Answer delay, page 37.
If you do not press any button for
4 seconds during Remote access,
your BT Studio Plus 5500 will hang up.
38