Access Code And Entering A Pause; Dialling Mode - BT EQUINOX 1200 User Manual

Wireless telephone bt equinox 1200

Hide thumbs Also See for EQUINOX 1200:

Table of Contents

6215 Equinox 1200 UG

Access code and entering a pause

If you are connecting your BT Equinox 1200 to a switchboard/PBX you may need to prefix

stored numbers with an access code (e.g. 9) in order to get an outside line. So that the

switchboard has time to pick up an outside line, you may also need to add a Pause after

the access code.

A pause is entered when storing a number in the phonebook (see page 23) or PABX access

code (see page 55) by pressing and holding the

With some switchboards/PBXs you may need to switch the dial mode from Tone to Pulse,

otherwise you should not need to adjust this setting.

1. Press

then scroll

Mode

then press OK.

2. Press

9/6/04

11:27 am

BT Equinox 1200 – Edition 6 – 28.05.04 – 5757

Base Settings

to highlight the setting you want. Press

Page 79

button until the display shows

and press OK. Press

to confirm.

General information

Dial

to highlight

Table of Contents