Snmp Community Add; Snmp Community Delete - Edge-Core ES4528V-38 Management Manual

| SNMP Commands
C 26
HAPTER
snmp community
add
snmp community
delete
E
XAMPLE
SNMP>engine id 800007e5017f000005
Changing Engine ID will clear all original local users
SNMP>
This command adds or modifies an SNMPv3 community entry.
S
YNTAX
snmp community add community [ip-address] [address-mask]
community - Specifies the community strings which allow access to
the SNMP agent. (Range: 1-32 characters, ASCII characters 33-126
only)
For SNMPv3, these strings are treated as a security name (see the
snmp trap security name
an SNMPv1 or SNMPv2 community string in the SNMPv3 groups
table (see snmp group add
ip-address - Specifies the source address of an SNMP client.
address-mask - Specifies the address mask for the SNMP client.
D S
EFAULT ETTING
public, private
C U
OMMAND SAGE
◆ All community strings used to authorize access by SNMP v1 and v2c
clients should be listed in the SNMPv3 communities table. For security
reasons, you should consider removing the default strings.
Add any new community strings required for SNMPv1 or v2 clients that
◆
need to access the switch, along with the source address and address
mask for each client.
◆ Up to 64 community names can be configured.
E
XAMPLE
SNMP/Community>add r&d 192.168.2.19 255.255.255.0
SNMP/Community>
This command deletes an SNMPv3 community entry.
S
YNTAX
snmp community delete index
index - Index to SNMP community table. (Range: 1-64)
– 346 –
command, page 345), and are mapped as
command, page 350).