Paper Position Not Suitable For Borderless Printing; Roll Paper Is Not Securely In Contact With Roll Holder - Canon iPF680 series Basic Manual

iPF680 Series

Paper position not suitable for borderless printing.

Paper position not suitable for borderless printing.
Cause
Because paper expands or
contracts depending on the
environment of use, it may
become narrower or wider
than the supported width for
borderless printing.
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

Roll paper is not securely in contact with roll holder.
When the roll was loaded, the roll was not inserted firmly all
the way on the Roll Holder.
Basic Guide
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that the edges are be-
tween the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cause
Paper position not suitable for borderless printing.
Corrective Action
User's Guide
➔
P.12
➔
Corrective Action
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder from the printer.
2. Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Attaching the Roll Holder to Rolls.")
3.
Load the Roll Holder in the printer.
P.12
➔
119