Canon iPF680 series Basic Manual page 34

Replacing the Printhead
7
While firmly holding the Printhead you have removed,
use your other hand to remove the orange Protective
Part (a). Squeeze the grips (c) of Protective Part (b)
and pull it down to remove it.
Important
8
With the nozzles facing down and the metal contacts
toward the back, insert the Printhead into the Car-
riage. Carefully push the printhead firmly into the Car-
riage, ensuring that the nozzles and metal contacts
do not touch the carriage.
9
Pull the Printhead Fixer Cover down toward the front
to lock the Printhead in place.
34
• The inside surface of the Protective Part (a) and Protective Part (b) is coated with ink to protect the noz-
zles. Be careful not to touch these surfaces when removing the caps.
The Printhead contains ink to protect the nozzles. We recommend removing Protective Part (b) as you
•
hold it over the Printhead package or safely out of the way to avoid spilling ink and staining your clothes
or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth.
• If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and
metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing
quality.
• Do not reattach the removed Protective Part. Dispose of these materials in accordance with local regula-
tions.
iPF680 Series
Basic Guide