Hp-Gl/2 Problems - Canon iPF680 series Basic Manual

iPF680 Series

HP-GL/2 problems

HP-GL/2 problems
With HP-GL/2, printing is misaligned ................................................................................................................... 105
Lines or images are missing in printed HP-GL/2 jobs. ................................................................................. 105
Lines are printed too thick or thin in HP-GL/2 print jobs ........................................................................... 105
HP-GL/2 jobs are printed in monochrome (or color) .................................................................................... 105
Printed colors of lines are inaccurate during HP-GL/2 printing .............................................................. 105
HP-GL/2 jobs are printed 6 mm larger than specified ................................................................................ 106
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified ............................ 106
HP-GL/2 printing takes a long time ...................................................................................................................... 106
Replotting with HP-GL/2 jobs is not possible. .................................................................................................. 106
The printer stops when printing a HP-GL/2 job (the carriage stops moving) ................................... 106
With HP-GL/2, printing is misaligned
With HP-GL/2, printing is misaligned
The plotter origin is incorrect.
The Margin setting in the Control Panel menu is incorrect.
Lines or images are missing in printed HP-GL/2 jobs.
Lines or images are missing in printed HP-GL/2 jobs.
The memory is full.
An HP-GL/2 command not supported by this printer was received.
The printer has received print data that includes HP RTL commands
when Auto Rotate is On in the Control Panel menu.
Lines are printed too thick or thin in HP-GL/2 print jobs Lines are printed too thick or thin in HP-GL/2 print jobs
Cause
The Width setting in the Control
Panel menu is incorrect.
ThickenFineLines in the Control
Panel menu is set to Off.
HP-GL/2 jobs are printed in monochrome (or color)
HP-GL/2 jobs are printed in monochrome (or color)
Cause
The Color Mode setting in
the Control Panel menu is
incorrect.
Printed colors of lines are inaccurate during HP-GL/2 printing
Printed colors of lines are inaccurate during HP-GL/2 printing
Cause
AdjustFaintLines is On in the Con-
trol Panel menu.
Basic Guide
Cause
Cause
Change the Width setting configured in Pen no. of the Palette A or Palette B selected in
the Control Panel menu.
(See "Menu Settings.")
If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more dis-
tinctly.
(See "Menu Settings.")
Check the Color Mode setting in the Control Panel menu.
(See "Menu Settings.")
However, for optimal Printhead performance, the printer consumes trace amounts of color ink even
when Monochrome is selected as Color Mode.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected
results. However, lines in some colors may appear broken.
Corrective Action
Check the printing commands.
Adjust the Margin setting values in the Control Panel menu.
Check the size of the data in the print job.
Check the print job and settings.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.")
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
User's Guide
➔
Corrective Action
With HP-GL/2, printing is misaligned
Corrective Action
User's Guide
➔
105