Paper Is Not Cut; Depression On The Leading Edge Is Left; The Size Of Clear Film Cannot Be Detected; Roll Paper Is Continuously Ejected - Canon iPF680 series Basic Manual

Paper is not cut

Cut Speed is not configured correctly in the
Control Panel menu.
During cutting, printed documents fall out at
an angle.
Paper is not cut
Paper is not cut
In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting.
In the Control Panel menu, Cutting Mode is set to Eject
or Manual.

Depression on the leading edge is left

Depression on the leading edge is left
Keeping a roll in the printer for a long time
without printing on it may leave a depres-
sion on the leading edge.

The size of clear film cannot be detected

The size of clear film cannot be detected
The Platen is soiled with ink or other substances.

Roll Paper is Continuously Ejected

Roll Paper is Continuously Ejected
Cause
Although sheets are
selected as the paper
source, a roll was ad-
vanced.
92
Cause
Change the Cut Speed setting in the Control Panel menu.
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
Cause
Cause
When printing quality is most important, we recommend setting TrimEdge Reload to
On or Automatic so that the paper edge is automatically cut before printing.
(See "Menu Structure.")
Cause
After roll ejection stops, follow these steps to reload the roll.
1. Push the Release Lever back.
2. Open the Roll Cover.
3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that
both ends of the roll are rewound evenly.
4. Pull the Release Lever forward.
5. Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper".
(See "Loading Rolls in the Printer.")
(See "Menu Structure.")
P.50
➔
(See "Specifying the Cutting Method for Rolls.")
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).")
(See "Paper Detailed Settings Dialog Box (Mac OS).")
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
P.50
➔
Corrective Action
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Corrective Action
P.15
➔
Corrective Action
User's Guide
➔
Corrective Action
User's Guide
➔
➔
Corrective Action
P.41
➔
iPF680 Series
User's Guide
➔
User's Guide
Basic Guide