Table of Contents
Advertisement
【DISPLAY FUNCTION】
TIME : Count up - No preset target, TIME will count up from 00:00 to maximum 99:59 with each increment
is 1 second.
Count down - If training with preset Time, Time will count down from preset to 00:00.Each preset
Increment
or decrement is 1 minute between 1:00 to 99:00.
SPEED : Display current training speed from 0.0 to maximum 99.9 km or ml.
RPM : Display current training rotation per minute.
DISTANCE : Count up - No preset target, Distance will count up from 0.00 to maximum 99.90 with each
Increment 0.1 KM. Count down - If training with preset target, Distance will count down from
preset to 0.00. Each preset increment or decrement is 0.1 KM (or ML) between 0.00 to 99.90.
CALORIES : Count up - No preset target, Calories will count up from 0 to maximum 990 with each 1 cal
increment. Count down - If training with preset target, Calories will count down from preset
time to 0. Each preset increment or decrement is 10 cal from 0 to 990 cal.
PULSE : The monitor can detect pulse signal from handgrip.
HEART SYMBOL: When monitor receive heart rate signal, the symbol will blinking.
WATT : Display current training watt figures.
【FUNCTION BUTTONS:】
MODE: To confirm all settings and to enter into exercise mode.
UP : To select training mode and adjust function value up.
DOWN : To select training mode and adjust function value down.
START/STOP : To start or stop training.
RECOVERY : After exercising for a period of time, keep holding on handgrips and press "RECOVERY"
button. All function display will stop except "TIME" starts counting down from 00:60 to 00:00.
Screen will display your heart rate recovery status with the F1,F2....to F6. F1 is the best,
F6. F6 is the worst. User may keep exercising to improve the heart rate recovery status.
(Press the RECOVERY button again to return the main display.)
(If monitor did not receive heart rate signal, RECOVERY function can not work.)
RESET : Return to main menu in stop mode and clean all preset function value to zero.
TOTAL RESET : To power on the computer.
【OPERATING INSTRUCTION:】
POWER ON
Connect adaptor to the computer to power on, LCD will display all segment with a long- beep as testing for
【PROGRAMMING MODE】
USER personal data setting (U1 – U4):
1-1 U1 is blinking, user may turn UP and DOWN to select user 1, user 2 to user 4
1-2 Preset personal data (incl. AGE, WEIGHT, HEIGHT, SEX). And press the MODE for confirmation.
1-3 The computer will enter into MANUAL mode immediately, and selected user may preset his own
exercise data (incl. TIME, DISTANCE, CALORIES and PULSE). The computer will memorize and will recall
those data every time when the user is selected.
1-4 User may start exercise by press START button.
1-5 Press RESET button reverse to training mode selection main menu.
Monitor manual instruction
2 seconds and wheel diameter 78" for seconds (drawing 1).
Drawing 1
13
Advertisement
Table of Contents
