Table of Contents
Advertisement
Program selections are MANUAL, PROGRAM, H.R.C., USER, WATT. Press UP and
DOWN to select the program you want and press START for QUICK START in Manual
mode.
MANUAL MODE
After selecting MANUAL mode, press UP and DOWN button to increase and decrease
level (from 1 to 16) and press MODE button to confirm. Level is adjustable during training.
(drawing 2)
select program profile from P1 to P12, press MODE button to confirm and enter the
selected profile. User may press UP and DOWN to adjust level. Level is adjustable during
training. (drawing 3)
After enter H.R.C. mode, press UP and DOWN to select different target from 55%, 75%,
90% and TARGET. Press MODE to confirm.
USER MODE
After enter USER mode, the first column of the profile is blinking, user may press UP,
DOWN and then press MODE to create his own profile. (from column 1 to column 20)
User may hold on pressing MODE button for 2 seconds to quit profile setting. (drawing 4).
The preset watt value 120 is flashing on screen in WATT setting mode. User may use
UP, DOWN button to set target value from 10 to 350. Press MODE button for confirm.
NOTE:
1. Adaptor spec: 9V, 500MA
2. If computer acted abnormal, user may plug out the adaptor and wait for 5 seconds
before plug in the adaptor again.
Drawing 2
PROGRAM MODE
After enter PROGRAM mode, press UP and DOWN to
Drawing 3
H.R.C. MODE
Each user may have his own user profile.
Drawing 4
WATT MODE
14
Advertisement
Table of Contents
