VeriFone NURIT 8000 Installation Manual page 32

M C
AINTENANCE AND LEANING
Cleaning the NURIT 8000
CAUTION
To clean the printer
32
NURIT 8000 I
NSTALLATION
•
To clean the PIN pad, use a soft, damp, lint-free cloth slightly dampened with
water and a drop or two of mild soap. For stubborn stains, use alcohol or an
alcohol-based cleaner. For best results, use a VeriFone Cleaning Kit. See
Accessories and Documentation.
Never use abrasive compounds or solvents, thinner, trichloroethylene, ketone-
based solvents, benzene, or synthetic cleansers – they can deteriorate plastic or
rubber parts.
Do not spray cleaners or other solutions directly onto the keypad or display.
Never clean the unit with liquids. Use only a lightly dampened cloth or soft brush.
Never rub or strongly press on the LCD display.
Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning and/or a soft
brush.
1
Disconnect the terminal from the power supply.
2
Open the paper roll compartment cover. See
3
Carefully lift the paper roll (see
paper or dirt that might be lodged in the compartment. If available, use a low-
pressure compressed air gun.
4
Replace the paper roll. See
5
Close the paper roll compartment cover. See
G
UIDE
Figure
Figure 14) and remove any excess pieces of
Figure 12.
Figure
11.
13.